I-WC-Co Powder ene-Wear-Resistance eqinile
Incazelo
WC-Co Powders:Izinto Ezisebenza Kakhulu Zezinhlelo Zokusebenza Ezingangeni
Sethula uhla lwethu lwezimpushana ze-WC-Co, ezidizayinelwe ukuhlinzeka ukumelana nokugqokwa okukhethekile nokuhlala isikhathi eside ezinhlobonhlobo zezinhlelo zokusebenza zezimboni.Izimpushana zethu zenziwe ngezinhlayiya ze-tungsten carbide (WC) ezihlanganiswe ndawonye yi-cobalt (Co) binder, okuholela ekutheni kube yinto eqinile futhi eqinile.
Ibanga lomkhiqizo wethu lihlanganisa amabanga amane ayinhloko: KF-60 WC-12Co, KF-61 WC-17Co, ne-KF-62 WC-25Co, ngalinye linokuqukethwe kwe-cobalt okuhlukahlukene nokusabalalisa usayizi wezinhlayiyana.I-KF-60 itholakala ngazo zombili izinhlobo ezisikiwe nezichotshoziwe noma ezihlanganisiwe nezihlanganisiwe, ezinosayizi wezinhlayiyana ezisukela ku-15-45μm no-10-63μm, ngokulandelana.I-KF-61 kanye ne-KF-62 yomibili i-agglomerated ne-sintered powders, enobukhulu bezinhlayiyana obusuka ku-15-45μm no-10-38μm.
Izimpushana zethu ze-WC-Co zinikeza ukumelana okuhle kakhulu nokugqokwa futhi zifaneleka ngokukhethekile izinhlelo zokusebenza lapho kukhona izinga eliphezulu lokungqubuzana, njengasemishinini evamile noma izindawo zokugqoka ezikhathazayo.Okuqukethwe okuphezulu kwe-cobalt ku-KF-61 naku-KF-62 kunikeza ukuqina okungcono, okuwenza alungele izinhlelo zokusebenza lapho ukumelana komthelela kuyadingeka.
Ngaphezu kokungagugi okukhethekile, izimpushana zethu ze-WC-Co nazo zinemisebenzi eminingi futhi zingasetshenziswa ngezindlela ezihlukahlukene.Zingafuthwa ezindaweni ezingaphezulu ukuze zenze ukunamathela okuqinile nokungagugi, noma zingasetshenziswa ukwenza izinto ezingagugi njengamathuluzi okusika, ama-bearing, nama-seal.
Esikhungweni sethu sokukhiqiza sesimanje, sisebenzisa amasu okucubungula athuthukile ukuze siqinisekise ukuhambisana nezimpushana zekhwalithi ephezulu.Imikhiqizo yethu ihlolwe ngokuqinile ukuze kuqinisekiswe ukuthi ihlangabezana nezindinganiso eziphakeme kakhulu zokumelana nokugqokwa nokuqina.
Kafushane, uhla lwethu lwe-WC-Co powders luyisinqumo esithembekile sezinhlelo zokusebenza zezimboni lapho ukumelana nokugqoka nokuqina kubalulekile.Ngezakhiwo zabo ezihlukile kanye nokuguquguquka, bahlinzeka ngesixazululo esingabizi kakhulu sokwelula impilo yezingxenye kanye nokwenza ngcono ukusebenza kwemishini.
Imikhiqizo efanayo
| Ibhrendi | Igama Lomkhiqizo | AMPERIT | I-METCO/AMDRY | WOKA | I-PRAXAIR | I-PAC |
| I-KF-60P | I-WC-12Co | 515 | 72F-NS | I-WC-114WC-489-1 | 127 | |
| I-WC-12Co | 518519 | 3101-3106 | WC-7271342 | 125126 127 | ||
| KF-60C | I-WC-12Co(Ikhabhoni Ephansi) | 512 | ||||
| I-KF-61P | I-WC-17Co | 526 | 5143 2005NS 73F-NS | 32023202 | WC-7291343 | |
| KF-62 | I-WC-25Co |
Ukucaciswa
| Ibhrendi | Igama Lomkhiqizo | Usayizi Wezinhlayiyana (μm) | Ikhemistri (wt%) | Uhlobo | Ukuminyana okusobala | Ukugeleza | Izakhiwo | Isicelo | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Co | C | Fe | W | Cr | B | Si | Ni | ||||||||
| KF-65 | I-WC-10Co4Cr | 15-45, 10-38 | 9.5-10 | 5.3-5.6 | ≤0.8 | U-Bal. | 3.5-4.0 | I-Sinter&Crush | 5.5-6.5g/cm3 | ≤25 s/50g | APS, HVOF,HVAF | Okunye ukufakwa kwe-chromium eqinile;I-Petroleum, iphepha, imishini evamile | |||
| KF-65 | I-WC-10Co4Cr | 15-45,10-38,5-30 | 9.5-10 | 5.3-5.6 | ≤0.8 | U-Bal. | 3.5-4.0 | Agglomerated futhi sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | APS, HVOF,HVAF | Okunye ukufakwa kwe-chromium eqinile;I-Petroleum, iphepha, imishini evamile | |||
| KF-65 | I-WC-10Co4Cr | 5-25, 5-15 | 9.5-10 | 5.3-5.6 | ≤0.8 | U-Bal. | 3.5-4.0 | Agglomerated futhi sintered | 3.5-4.8 g/cm3 | Ukondla okuzinzile kusiphakeli sempushana | I-HVOF,HVAF | Enye i-chromium plating eqinile; Indawo ebushelelezi, imishini yeposi encane noma yamahhala; | |||
| KF-60 | I-WC-12Co | 15-45, 10-63 | 10.5-12 | 4.9-5.4 | ≤0.8 | U-Bal. | I-Sinter&Crush | 5.5-6.5 g/cm3 | ≤25 s/50g | APS, HVOF | Ukumelana nokugqoka, Ukumelana nokugqoka okushisayo | ||||
| KF-60 | I-WC-12Co | 15-45, 10-38, 5-30 | 10.5-12 | 4.9-5.4 | ≤0.8 | U-Bal. | Agglomerated futhi sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | APS, HVOF, HVAF | Gqoka ukumelana, Fretting bafake ukumelana; imishini jikelele | ||||
| KF-61 | I-WC-17Co | 15-45, 10-38 | 15.5-17 | 4.5-5.1 | ≤0.8 | U-Bal. | Agglomerated futhi sintered | 3.5-5.5 g/cm3 | ≤25 s/50g | APS, HVOF, HVAF | Ukumelana nokugqoka, ukumelana nokugqoka okushisayo, Ukuqina okungcono; imishini ejwayelekile | ||||
| KF-62 | I-WC-25Co | 15-45, 10-38 | 22-26 | 4.0-4.6 | ≤0.8 | U-Bal. | I-Agglomerated and sintered, Ukuminyana | 3.0-5.5 g/cm3 | ≤25 s/50g | I-APS, izibhamu zokuqhunyiswa, isifutho esibandayo | Ukuqina kokugqoka, Ukuqina okungcono | ||||
| KF-66 | WC-23%CrC-7Ni | 15-45, 10-38 | 6.0-6.8 | ≤0.8 | U-Bal. | 16.5-20 | 5.5-7 | Agglomerated futhi sintered | 3.0-5.0 g/cm3 | ≤25 s/50g | APS, HVOF,HVAF | Enye i-chromium plating eqinile; Isetshenziselwa indawo ephansi ye-acid/alkali engu-200 ℃;I-Anti oxidation nokumelana nokugqoka ku-750 ℃ | |||
| KF-66 | 43WC-43%CrC-14Ni | 15-45,10-38 | 7.8-8.4 | ≤0.8 | U-Bal. | 35-38 | 12-14 | Agglomerated futhi sintered | 2.0-4.0 g/cm3 | ≤35 s/50g | APS, HVOF, HVAF | Enye i-chromium plating eqinile Isetshenziselwa indawo ephansi ye-acid/alkali engu-200 ℃ | |||
| KF-63 | WC-10Ni | 15-45,10-38 | 4.5-5.2 | ≤0.1 | U-Bal. | 8.5-10.5 | Agglomerated futhi sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | APS, HVF, HVAF | I-non-magnetic wear resistant coating.Ukumelana nokugqwala okungcono | ||||
| KF-70 | I-Cr3C2-25NiCr | 15-45, 20-53 | 9-11 | ≤1 | U-Bal. | 18-21.5 | Agglomerated futhi sintered | ≥2.3 g/cm3 | Ukondla okuzinzile kusiphakeli sempushana | APS, HVOF | I-Anti oxidation kanye nokumelana nokugqoka ku-815 ℃ | ||||
| KF-69 | I-Cr3C2-20NiCr | 15-45, 20-53 | 9-11 | ≤1 | U-Bal. | 15-17.5 | Agglomerated futhi sintered | ≥2.3 g/cm3 | Ukondla okuzinzile kusiphakeli sempushana | APS, HVOF | I-Anti oxidation kanye nokumelana nokugqoka ku-815 ℃ | ||||
| KF-71 | I-Cr3C2-30NiCr | 15-45, 20-53 | 9-11 | ≤1 | U-Bal. | 15-17.5 | Agglomerated futhi sintered | ≥2.3 g/cm3 | Ukondla okuzinzile kusiphakeli sempushana | APS, HVOF | I-Anti oxidation nokumelana nokugqoka ku-815 ℃.Ukuqina okungcono | ||||
| KF-60 | I-WC-12Co (Ikhabhoni Ephansi) | 15-45, 20-53 | 10.5-12 | 4.0-4.4 | ≤0.8 | U-Bal. | Agglomerated futhi sintered | 4.0-6.0 g/cm3 | ≤18 s/50g | I-HVOF,HVAF | Isetshenziselwa amaroli okugeza e-Zn Emigqeni Yokugalela Eqhubekayo | ||||
| KF-68 | I-WC-30WB-10Co | 15-45,20-53,10-38 | 9-11 | 3.5-3.9 | U-Bal. | 1.4-1.7 | Agglomerated futhi sintered | 3.0-4.9 g/cm3 | ≤30 s/50g | I-HVOF,HVAF | Isetshenziselwa amaroli okugeza e-Zn Emigqeni Yokugalela Eqhubekayo | ||||
| KF-68 | I-WC-30WB-5Co5Cr | 15-45,20-53,10-38 | 4-6 | 3.5-3.9 | U-Bal. | 4-6 | 1.4-1.7 | Agglomerated futhi sintered | 3.0-4.9 g/cm3 | ≤30 s/50g | I-HVOF,HVAF | Isetshenziselwa amaroli okugeza e-Zn Emigqeni Yokugalela Eqhubekayo | |||
| KF-300E | 35%WC-NiCrBSi | 15-53,45-104 | 2.5-3.2 | 1.0-2.6 | 32-35 | 7.5-9 | 1.5-1.9 | 2.0-2.7 | U-Bal. | I-WC kanye ne-NiCrBSi eyenza ingxubevange | 4.0-4.9 g/cm3 | ≤16 s/50g | HVOF, PS | Olunye uhlobo oluhlanganisiwe lwe-WC+Ni60;Ukusetshenziswa kwezinto eziphezulu,Ukusetshenziswa kwamandla okuphansi, umthelela oshisayo ophansi;Isetshenziselwa isikhunta sengilazi | |
| KF-300F | 50%WC-NiCrBSi | 15-53,45-104 | 3.2-4.3 | 0.8-2.0 | 45-48 | 5.8-7.2 | 1.0-1.7 | 1.5-2.4 | U-Bal. | I-WC kanye ne-NiCrBSi eyenza ingxubevange | 5.0-7 g/cm3 | ≤16 s/50g | HVOF, PS | Olunye uhlobo oluhlanganisiwe lwe-WC+Ni60;Ukusetshenziswa kwezinto eziphezulu,Ukusetshenziswa kwamandla okuphansi, umthelela oshisayo ophansi;Isetshenziselwa isikhunta sengilazi | |
